Once the Link Resolver settings are configured in the dashboard, it is worth testing it to make sure it is working as expected. Please follow the corresponding steps below to test your configuration.
Testing holding information systems
You can use the Test Integration button to test if the integration with the below link resolver is successful: Alma, 360Link, SFX, Summon, EBSCO LinkIQ, TDNet, OCLC Knowledge Base API
-
In the Lean Library Dashboard, select Alternatives Settings > Holding Settings
-
Click on the button Test Integration
-
When it appears Connection Success, your Linksolver has configured successfully
What to do when connection failed
If you do not get redirected, or the example article cannot be found on the redirected page, then something is wrong with the Link Resolver configuration. First, double-check your Link Resolver information is correct. If the information is correct, please reach out to support@leanlibrary.com for further assistance.
Testing holding information systems: KBART
-
In the Lean Library Dashboard, select Alternatives Settings > Holding Settings
-
Click on the button Test Integration
-
When it appears Connection Success, your Linksolver has configured successfully
What to do when connection failed
If you do not get redirected, or the example article cannot be found on the redirected page, then something is wrong with the Link Resolver configuration. First, double-check your Link Resolver base URL. Then, check if your Linkresolver parameters are set up properly - see this article about how to configure the parameters.